|

Why Authorized Employee Training Is Important

August 20, 2021

By Jake Thatcher, Senior Safety Project Engineer, Rockwell Automation

Authorized employee training is one of the most important aspects of a complete energy control program. Training delivers the knowledge that employees need to effectively lock out equipment for servicing or maintenance. This type of training should include the use of energy control procedures as well as lockout locks, tags and devices.

Training Prepares Employees to Do Their Job Efficiently

The purpose of authorized employee training is to verify that the employees understand the purpose and function of the energy control program and that they also have the knowledge and skills required to use the program properly and safely. Employers are required to provide the training to the authorized employees prior to a lockout ever being administered.

Anyone Who Services Equipment Must be Trained as an Authorized Employee

By OSHA standards, an authorized employee is defined as any employee who services or maintains equipment and needs to perform lockout/tagout. Authorized employees are required to be trained in the recognition of energy sources – for example, electrical, pneumatic, water, gas, steam – and the types of magnitudes that are present in the corresponding facility. They will also need to be trained on how to isolate and control the energy correctly on different equipment.

These employees must know how to test the equipment to verify that all energy has been properly controlled prior to working on the unit. For example, a new employee could likely lock out a pump without issue, but there would be a greater risk if they were tasked with shutting down a boiler since they wouldn’t understand how to do this without the proper training, and there is a greater risk of a boiler imploding unless the proper steps are taken to shut it down before servicing.

Understanding the Value of Exclusive Control (Locks) and the Limitations of Warning Tags is Essential

What happens when an energy source does not have a means to have a lock applied? Employees must be trained on the limitation of tags. Tags are simply warning devices that do not provide a physical restraint to the energy sources themselves. The authorized employees also need to be instructed not to remove or bypass any tags, and that the authorized employee who installed the tag is the only employee who is permitted to remove it. In addition, the authorized employees must be trained on when to use the tagout system, and what information is required to be included on the tag.

Monitoring and Review for Safety Employee Success is an Annual Job

Additionally, employees may need to be retrained after their initial training. The need for retraining will be determined during the annual review that is required by the OSHA standard 1910.147. If any deficiencies are found during the annual review of the employees, retraining is required for those workers who did not pass the annual review. Also, authorized employees must be retrained if there is a change in the energy control procedures at the site, or the employee’s job description.

Final Tips for Lockout/Tagout Program Success

For successful energy control program training, it is important to deliver training that is understandable and relatable to the facility itself. For example, workers at a pharmaceutical plant would need to know how reverse osmosis systems work, but at a paper mill there is no need. Food manufacturing sites that use ammonia cooling systems for large cooling warehouses or walk-in freezers would need special training for authorized employees working on equipment like ammonia compressors.

The safety of employees will increase greatly when you have an effective authorized employee training program in place. Be sure to include all necessary information that OSHA requires, as well as any other additional information specific to the site.

If you would like help with creating or delivering your authorized employee training, Rockwell Automation has lockout/tagout specialists who have helped hundreds of companies reach compliance with their lockout/tagout programs.

Source

Related Articles


Latest Articles

  • ABB Contactor Selection Guide Canada

    October 1, 2025 ABB contactors are among the most reliable electrical switching devices in industrial automation. As Canada’s leading ABB authorized distributor, Proax has helped thousands of engineers and technicians select the right ABB contactor for their applications. Whether you’re designing a new motor control panel or replacing existing equipment, choosing the right ABB contactor can… Read More…

  • 25 Advanced Motion Control Questions Answered

    October 1, 2025 Electromate has compiled a list of 25 advanced mechatronic engineering FAQs covering inertia, vibration, servo safety, control tuning, encoder resolution, and motion system design, and provided answers from their team of experts across the country. How do I model moment loading in real-world applications with offset payloads? Moment loading should be calculated… Read More…


Featured Article

Revolutionizing Material Movement with Autonomous Mobile Robots

Revolutionizing Material Movement with Autonomous Mobile Robots

In today’s fast-paced manufacturing and logistics industries, the need for efficient and flexible material movement solutions has never been greater. Traditional methods like conveyor systems, forklifts, and manual pushcarts have served us well, but they come with limitations.

That’s why Omron is thrilled to announce the launch of their game-changing MD Series of Autonomous Mobile Robots (AMRs). Read more


Products

  • Schneider Electric Unveils New AI Data Centre Reference Designs with NVIDIA

    October 6, 2025 Schneider Electric, a leader in the digital transformation of energy management and automation, has announced new reference designs developed with NVIDIA that significantly accelerate time to deployment and aid operators as they adopt AI-ready infrastructure solutions. The first reference design delivers the industry’s first and only critical framework for integrated power management and liquid… Read More…

  • PISA-M Electronic Circuit Breakers: New NEC Class 2 Compliant Variants Available

    October 6, 2025 PULS introduces new 4-channel electronic circuit breakers designed specifically for power distribution in NEC Class 2 circuits, expanding the existing PISA-M series. PISA-M enables the safe distribution of load current into four individual Class 2 circuits. This offers a cost-effective alternative to multiple individually approved NEC Class 2 compliant power supplies, reducing both acquisition costs and… Read More…