|

Power Supply for Building Automation: Supply and Charge Via USB

February 22, 2024

Power Supply for Building Automation: Supply and Charge Via USB

The Step Power power supplies from Phoenix Contact are tailored to the needs of modern building automation. They supply smart meter gateways, Raspberry Pis, and other smart home components via the USB port. In addition, they can be used for the fast charging of mobile end devices and other 5 V loads.

The power supply unit has a USB-A or USB-C port for up to 15 W. Using it as a USB charger provides more space in the distribution board, control cabinet, or flat control panels due to the particularly narrow overall width of just 18 mm (1 HP). This completely eliminates the need for the classic combination of an electrical outlet with an overall width of 45 mm (2.5 HP) and a USB power supply unit. The integrated cable groove with strain relief in the housing of the power supply enables the USB cable to be routed easily under the cover of the distribution board, if required – thus simplifying handling.

With low no-load losses of <0.1 W and a high degree of efficiency, the Step Power power supplies offer optimum energy efficiency in buildings. Due to effective energy savings achieved as a result of maximum efficiency in no-load operation and partial-load operation, the power supplies meet the stringent requirements of the efficiency standards of the Ecodesign Directive. The large wide range input of 85 V AC … 264 V AC and the temperature range of -25 to +70°C also enable worldwide use in almost all ambient conditions.

Power supplies for building automation

Supply and charging via the USB port

The STEP power supplies supply power to both Raspberry Pis and smart home components via the USB port. In addition, they can be used for the fast charging of mobile end devices.

Main features
  • No-load losses: <0.1 W
  • USB-A and USB-C connection flexibility
  • Max. output power: 3 A
  • Overall width: 18 mm
  • Wide temperature range: -10°C … +70°C
Your Advantages
  • Two connection methods: USB-A and USB-C
  • Easy installation in the subdistribution with an integrated cable groove in the housing
  • Significant space savings in the control cabinet through use as a USB charger
  • Energy savings with the highest level of efficiency in no-load and partial-load operation (Efficiency Level VI)

Source

More Information

Product List

Related Product

Power Supplies for Extreme Ambient Conditions from Phoenix Contact

The third generation of power supplies sets a new standard in machine building. The power supplies are compact, robust, reliable, and impress with their easy handling. With the protective-coated PCB, the new power supply ensures high system availability, even under extreme ambient conditions. The coating protects against dust, corrosive gases, and humidity. Failures due to creepage currents and electrochemical migration caused by corrosion are also prevented.

The new Trio Power power supplies save space due to their narrow overall width and capability of being mounted directly side by side. The low overall depth enables installation in 125 mm small housings. The power supply units also enable particularly easy handling: Push-in connection technology allows for quick and tool-free installation. Integrated marking fields can be used for easy EID and circuit marking. Due to an intuitive commissioning concept, the devices are quickly ready for use. The mechanical lock of the potentiometers ensures that the devices are also tamper-proof.

Furthermore, the power supplies feature smart diagnostic options. The multicolor LEDs and a collective relay contact are used to signal all relevant states, such as DC OK, overload, and short circuit. The dynamic boost (150 percent/5 seconds) also enables difficult loads to be started. With the powerful output characteristic curve, even capacitive loads up to 960 W output power in 1 AC and 3 AC can be charged without any problems.

Related Articles


Latest Articles

  • Spring Spotlight: Unlock Smart I/O & Filter Performance

    June 19, 2025 Introduction As digital transformation reshapes manufacturing and warehousing, gaining actionable insights from the field and protecting sensitive assets are top priorities. Smart I/O brings intelligence to every corner of your facility, while motor protection filters shield your drives and motors from harmful voltage transients. Together, they form a robust foundation for a… Read More…

  • Feedback Devices: Exploring Linear, Rotary and Sine Encoders

    June 19, 2025 Encoders are the most widely applicable feedback devices for high-precision industrial servo systems. Learn the operating principles and appropriate applications for linear, rotary and sine encoders, as well as how to mitigate EMI/RFI noise for the most precise and reliable servo system control. Encoders: The High-Resolution Feedback Choice Encoders are characterized under… Read More…


Featured Article

Revolutionizing Material Movement with Autonomous Mobile Robots

Revolutionizing Material Movement with Autonomous Mobile Robots

In today’s fast-paced manufacturing and logistics industries, the need for efficient and flexible material movement solutions has never been greater. Traditional methods like conveyor systems, forklifts, and manual pushcarts have served us well, but they come with limitations.

That’s why Omron is thrilled to announce the launch of their game-changing MD Series of Autonomous Mobile Robots (AMRs). Read more


Products

  • Download the Latest July 2025 MTE Pricelist

    July 3, 2025 Download the Latest July 2025 MTE Pricelist Vanco’s mission has always been to provide effective and professional solutions tailored to their clients’ needs. They specialize in control cabinets and the components necessary to build comprehensive control systems. Please see the updated MTE pricelist effective July 1st, 2025 now available to download for free…. Read More…

  • POSITAL Explosion-Proof Rotary Encoders with UL Certification

    July 3, 2025 POSITAL’s explosion-proof IXARC incremental and absolute rotary encoders have been certified as complying with UL requirements for operation in areas with hazardous levels of flammable gases, dust and fibers (Class I, Division 2, Group A, B, C and D; Class II, Division 2, Group F and G; and Class III) These devices… Read More…