Cognex Corporation recently introduced the In-Sight D900 Color. Featuring Cognex’s deep learning software inside an In-Sight industrial-grade smart camera, the D900C solves a broad range of complex in-line inspection applications where color imaging is an essential component.
Banner Engineering’s VE Series Smart Camera now comes equipped with barcode identification capabilities, in addition to the original vision functionality. For applications where both vision and identification are required, reduce the number of deployed units by installing a single VE device.
The LC15T In-Line Touch Switch is a sealed, capacitive touch switch that can be connected in-line with many types of DC devices for on/off and PWM control. With a 4-amp output capacity, it can even control the largest of Banner’s DC lights. Its touch device interface and visual status indication make the LC15T an easy-to-use, operator-centric controller.
Converting condition monitoring and process sensors to enable OEE initiatives just got easier with the new S15C Series In-Line Converters from Banner. The S15C converters are small, plug-on modules that seamlessly fit into your factory applications to convert Modbus sensor data and analog sensor signals into digital IO-Link data.
Experience the benefits of In-Series Diagnostics (ISD) on standard safety devices with two normally closed set of contacts—such as mechanical safety switches and panel-mounted E-stops—with the new ISD Connect. A compact T-connector that fits in-line with other ISD devices, the ISD Connect links a non-ISD device to a daisy chain of up to 32 devices.
In mid-August of 2020, Schmalz introduced a new generation of area grippers for its vacuum tube lifters in the JumboErgo series. The FMP is hugely versatile and reliably grips heavy workpieces weighing up to 140 kilograms even when only part of the suction area is covered.
With “Control Panel Design” Siemens Smart Infrastructure has integrated new electrical planning features into TIA Selection Tool, the Siemens configuration and ordering software. This makes electrical pre-planning completely digital. Now, electrical planners can design and dimension the main electrical components of a machine quickly, easily, and in accordance with IEC and UL standards.
Murrelektronik optocouplers, slim interface relays and multi-mode relay timers are now available from AutomationDirect. Murrelektronik optocouplers (from $16.50) are used to combine different signal levels or to isolate one signal from another. Optocouplers are similar to relay interfaces, providing an optoelectronic signal transfer between input and output.
Balluff’s new CC-Link IE Field Basic network block with IO-Link makes it easy to connect Ethernet devices while providing the benefits of IO-Link. With 100 Megabit Ethernet, it delivers optimal performance in applications with low automation levels, where the gigabit speed of the CC-Link IE Field Master is not needed, such as bar loading magazines.
The Mach 3 is designed for digitally sensitive applications and comes with added feature ‘Active SineWave Tracking’. It is used on MRI’s, dentist offices, large LED Jumbotrons, computer rooms and truck scales.
Perfectly matched components are the key to efficient and high-performance machine automation. SEW-EURODRIVE offers a comprehensive product portfolio of all required components. From drive technology through control platforms to the human machine interface (HMI), SEW-EURODRIVE provides a finely scaled range of matched components, further enhanced and rounded off with the MOVI-PLC I/O system.
Here’s the dilemma, you consistently hit the same cable and wiring issue, the only solution you have uses existing products and you know the end result is far from ideal. But it’s all you have! This is a frustrating issue faced by many electrical engineers. Surely, there’s a better way, a better solution.
Beckhoff is launching the PS power supply series, initially comprising 18 new devices. The 1- and 3-phase DIN-rail-mountable power supply units are very compact and supply output currents from 2.5 to 40 A. Ideal for industrial applications, the temperature-optimized device design of these power supplies ensures excellent convection cooling, long service life, maximum reliability and up to 96.3% efficiency.
Littelfuse, Inc. recently announced the expansion of its SPXV series solar string fuses to include 35 to 60 amperage models. Designed to integrate into an LFXV15 fuse block and cover holder, these 20 x 127 mm 1500 V DC solar fuses protect photovoltaic (PV) installations from overloads and short circuits to minimize damage to solar panels.
B&R is adding the new 8LW and 8LS servo motor series with high torque density to its portfolio. The sophisticated design of these motors helps them achieve up to 75% higher nominal torque than comparable motors when used together with an ACOPOS servo drive. Machine builders can make their machines substantially more compact and economical.
The new ELM72xx EtherCAT Terminals are fully functional servo drives in robust metal housings that deliver an output current (Irms) of up to 16 A at 48 V DC for the power supply. They expand the Beckhoff portfolio of compact drive technology in I/O terminal format and offer all of the current technology features together with increased performance and functionality compared with comparable EL series I/O designs.