| | |

BionicBee: Autonomous Flying in a Swarm

April 24, 2024

BionicBee: Autonomous Flying in a Swarm

BionicBee – ultralight flying object with precise control

For more than 15 years, the Bionic Learning Network has been focusing on the fascination of flying. In addition to the technical decoding of bird flight, the team has researched and technologically implemented numerous other flying objects and their natural principles. With the BionicBee, the Bionic Learning Network has now for the first time developed a flying object that can fly in large numbers and completely autonomously in a swarm. The BionicBee will present its first flight show at the Hannover Messe 2024.

At around 34 grams, a length of 220 millimetres and a wingspan of 240 millimetres, the BionicBee is the smallest flying object created by the Bionic Learning Network to date. For the first time, the developers used the method of generative design: after entering just a few parameters, a software application uses defined design principles to find the optimal structure to use as little material as necessary while maintaining the most stable construction possible. This consistent lightweight construction is essential for good manoeuvrability and flying time.

Autonomous flying in a swarm

The autonomous behavior of the bee swarm is achieved with the help of an indoor locating system with ultra-wideband (UWB) technology. For this purpose, eight UWB anchors are installed in the space on two levels. This enables an accurate time measurement and allows the bees to locate themselves in the space. The UWB anchors send signals to the individual bees, which can independently measure the distances to the respective transmitting elements and calculate their own position in the space using the time stamps.

To fly in a swarm, the bees follow the paths specified by a central computer. To ensure safe and collision-free flight in close formation, a high degree of spatial and temporal accuracy is required. When planning the path, the possible mutual interaction through air turbulence “downwash” must also be taken into account.

As every bee is handmade and even the smallest manufacturing differences can influence its flight behavior, the bees additionally have an automatic calibration function: After a short test fl ight, each bee determines its individually optimized controller parameters. The intelligent algorithm can thus calculate the hardware differences between the individual bees, allowing the entire swarm to be controlled from outside, as if all bees were identical.

Source

More Information

Festo

Related Story

Festo’s Bionic Swift: New Impulses for Factory and Process Automation

In everyday factory operations, automation technology performs typical tasks such as gripping, moving and positioning goods, and controlling and regulating processes. Nature solves all these tasks naturally, simply, and energy efficiently. What could be more logical than to examine these natural phenomena and learn from them? This is why in 2006 Festo set up an international research network linking Festo to well-known universities, institutes, development companies, and private inventors: the Bionic Learning Network.

Related Articles


Latest Articles

  • Building the Future of Smart Tool Manufacturing – Together

    Why now Is the time to join the AIMS ecosystem August 27, 2025 By Samuel Kirkpatrick, ANCA Senior Product Manager – AIMS The manufacturing industry is undergoing its most transformative shift in over a century. As smart automation, AI-driven production systems, and advanced robotics redefine what’s possible, manufacturers are seeking ways to scale efficiently, adapt… Read More…

  • Comparing maxon EC-i vs ECX Motors: Which One Fits Your Design?

    August 19, 2025 The choice between maxon’s EC-i and ECX motor series depends on whether the application prioritizes torque or speed, rugged durability or quick responsiveness, and high load-handling capability or low-inertia performance. Both maxon product lines use brushless DC motor technology but are engineered with distinct rotor architectures and performance envelopes. This comparison outlines… Read More…


Featured Article

Revolutionizing Material Movement with Autonomous Mobile Robots

Revolutionizing Material Movement with Autonomous Mobile Robots

In today’s fast-paced manufacturing and logistics industries, the need for efficient and flexible material movement solutions has never been greater. Traditional methods like conveyor systems, forklifts, and manual pushcarts have served us well, but they come with limitations.

That’s why Omron is thrilled to announce the launch of their game-changing MD Series of Autonomous Mobile Robots (AMRs). Read more


Products

  • Emergent Vision Technologies Announces All EROS 10GigE Camera Models Now Shipping

    August 27, 2025 Emergent Vision Technologies is announcing that all models of the groundbreaking EROS 10GigE camera series are now officially shipping. Originally launched in December 2024, Emergent Vision Technologies says EROS is the smallest, lowest power10GigE camera in the world. “Thirty-nine new cameras across color, mono, SWIR, polarized, and UV sensors are now available… Read More…

  • Remote Display Unit Type EXCRDU2 from Lovato Electric

    August 26, 2025 LOVATO Electric expands its range of accessories for soft starters and variable speed drives with the new EXCRDU2 remote display unit. It is compatible with LOVATO Electric soft starters ADXL series and ADXNP type, as well as variable speed drives VLB series, equipped with an optional RS485 port. Up to 32 devices can be connected to the same unit, even… Read More…