| |

ANCA’s Peel Grinding Solution: From Blank to Finished Tool in a Single Setup on the MX7 Platform

November 26, 2024

ANCA’s Peel Grinding Solution: From Blank to Finished Tool in a Single Setup on the MX7 Platform

ANCA’s advanced grinding solutions offer seamless finished tool grinding in a single setup, including blank preparation. This setup features the P-axis Arobotech, which supports blanks at the grind point, enabling the efficient production of various tools with a surface finish below 0.2 Ra. This process significantly reduces cycle time while boosting productivity. The 3000 RPM headstock on the MX7 platform further enhances performance, allowing the tool to spin at optimal speeds for this application.

The MX7 platform, equipped with six wheel packs as recommended by ANCA’s application team, supports the grinding of various tool shapes in a single setup, eliminating the need for wheel changes. Depending on the tool’s shape and geometry, grinding can be performed at either the 3 or 12 o’clock position. Additionally, a specially designed hydraulic pump controls the clamping pressure based on diameter, including up/down pressure, to achieve faster cycle times. Key benefits include:

  • Tool diameter range: 1mm to 25.4mm
  • Capability to handle small to large diameter taper ballnose, corner radius, lollipop cutters, step tools, and more in a single setup – reducing cycle time and enhancing productivity and accuracy
  • Short setup time due to Arobotech support
  • Arobotech pads can support a range of diameters: 3 to 10mm, 10 to 16.5mm, and 16.5 to 25mm, all in a single setup
  • Collet changes supported within the diameter range
  • A proven blanket grinding process, well-established in the market
  • All these features are supported on the MX7 ULTRA, offering improved surface finish, stability, and accuracy

This application is versatile, working not only with sized blanks but also with bar stock loading.

ANCA’s Peel Grinding Solution: From Blank to Finished Tool in a Single Setup on the MX7 Platform

Bar stock loading, commonly known as “blanket grinding,” involves the automatic loading and grinding of multiple tools from a single blank. This process is ideal for batch production of endmills, drill heads, and similar tools. Its uniqueness lies in the ability to part off completed tools from the blank and then extend the blank from the collet to grind subsequent tools.

ANCA’s LoaderMate software is designed to manage the number, location, and length of blanks in the pickup pallet, allowing for varying blank diameters per row. It also features a used bar report, detailing the number of tools ground and the total length of bar to be scrapped for each blank.

Source

More Information

For more information, visit www.anca.com or contact your local ANCA representative.

Related Story

ANCA Celebrates 50th Anniversary and Contributions to the High-Precision Tool-Cutting Industry

ANCA was founded by Pat Boland, an Electrical Engineer, and Pat McCluskey, an Industrial Electronics Engineer in 1974, in Melbourne Australia. For 50 years, the company expanded globally. Today they employ over 1200 people worldwide and serve customers in more than 46 countries. Pat Boland, co-founder of ANCA, discusses this journey and some of the innovations they have contributed to the high-precision tool-cutting industry.

Related Articles


Latest Articles

  • Small Town Infrastructure is Being Retrofitted, Federal Funding Helps Drive This Change

    September 9, 2025 By Krystie Johnston Municipalities across Canada are tackling climate change. From big cities to small towns, every action counts. Densely populated metropolitan areas are usually the first places that experience infrastructure upgrades to public buildings and structures because they need to support the increased demands of a growing population. But small towns… Read More…

  • Bossard is Scaling Front Line Flexibility

    September , 2025 Experience Smart Factory Solutions that Adapt to Your Operators’ Needs at FABTECH 2025 By Krystie Johnston Bossard is bringing the future of assembly and inventory management to FABTECH 2025 from September 8 – 11. Visit them at Booth #B13000, at the North Hall in the Automation Pavilion at McCormick Place in Chicago… Read More…


Featured Article

Revolutionizing Material Movement with Autonomous Mobile Robots

Revolutionizing Material Movement with Autonomous Mobile Robots

In today’s fast-paced manufacturing and logistics industries, the need for efficient and flexible material movement solutions has never been greater. Traditional methods like conveyor systems, forklifts, and manual pushcarts have served us well, but they come with limitations.

That’s why Omron is thrilled to announce the launch of their game-changing MD Series of Autonomous Mobile Robots (AMRs). Read more


Products

  • WAGO Expands 750 Series with New Functional Safety I/O Modules

    September 12, 2025 WAGO Expands 750 Series with New Functional Safety I/O Modules WAGO is introducing three functional safety I/O modules to be used with WAGO’s PFC controllers. These new 750 Series modules have four safe inputs along with either two safe outputs at 10 A/24 VDC, or four safe outputs at 2 A/24 VDC… Read More…

  • First Controllers in Trio’s Motion-PLC Range Simplify the Design of Stand-Alone Machines

    September 10, 2025 Trio Motion Technology has launched the first controllers from its new Motion-PLC range, designed to provide advanced motion control performance with the functionality and simplicity of a PLC. The new class of controller combines high-performance motion control over EtherCAT plus logic and I/O expansion, enabling faster, simpler machine development. The first models in… Read More…