|

Endress+Hauser Supports 1.5 Degree Target

April 20, 2023

Endress+Hauser Supports 1.5 Degree Target
This vessel can store waste heat from Endress+Hasuer’s production to heat the building

Endress+Hauser supports the Paris Agreement’s 1.5 degree target. By 2050 at the latest, the specialist for measurement and automation technology aims to reduce greenhouse gas (GHG) emissions to net zero. The company has joined the Science Based Targets initiative (SBTi), which focuses on reducing rather than offsetting emissions, and intends to draw up a corresponding climate strategy in the coming months.

Endress+Hauser Supports 1.5 Degree Target

To limit global warming to 1.5 degrees Celsius, GHG emissions must be halved by 2030 and reduced to zero by 2050. With this in mind, SBTi is helping companies voluntarily set climate protection targets based on scientific findings. “We are currently working on a climate strategy for the Group that will define specific interim targets on the way to net zero,” says Dr Manfred Jagiella, who as a member of the Executive Board is responsible for sustainability at Endress+Hauser.

Dr Manfred Jagiella, Member of Endress+Hauser Executive Board

Carbon footprint as basis for sustainability strategy

For many years, Endress+Hauser has attached great importance to energy efficiency when constructing new buildings, using renewable energy at many locations and promoting the use of electric vehicles.

Endress+Hauser Supports 1.5 Degree Target

“We want to consistently pursue this path, especially as the requirements from all sides are growing,” emphasizes Julia Schempp. As Endress+Hauser’s Corporate Social Responsibility Officer, she is driving the climate strategy as well as other improvements in ecological, ethical and social matters. In doing so, she can rely on colleagues in a global network.

Julia Schempp, Endress+Hauser’s Corporate Social Responsibility Officer

As a first step, Endress+Hauser measured its carbon footprint in 2022 in accordance with the GHG Protocol, an international standard for GHG accounting. For this purpose, key figures on direct and indirect emission sources (scope 1 and 2) were evaluated. Scope 3 for emissions along upstream and downstream value chains is still in progress.

Since 2021, Endress+Hauser has also been participating in the Carbon Disclosure Project (CDP), the world’s largest disclosure initiative for corporate environmental strategies.

Sustainability activities also cover the supply chain

Endress+Hauser intends to implement the climate and sustainability targets along the Group-wide standardized business processes. The globally active company is also keeping an eye on its supply chains. Julia Schempp has also been acting as Human Rights Officer since the beginning of the year. A human rights and environmental risk management system has been introduced to identify and avoid risks within the company and with suppliers at an early stage.

Measures include a whistleblower system for human rights or environmental misconduct, which can be accessed via the Endress+Hauser website. Employees, business partners and third parties can report possible violations here – anonymously if necessary – which are then independently investigated.

This complies with the recommendations of the German Supply Chain Due Diligence Act and the Swiss Ordinance on Due Diligence and Transparency Regarding Minerals and Metals From Conflict Areas and Child Labor.

Customer forum on the sustainable transformation

Endress+Hauser supports 1.5 degree target

“Combining economic success with social action and ecological responsibility has characterized Endress+Hauser since it was founded 70 years ago,” emphasizes CEO Matthias Altendorf. He believes the Group is on the right track in this respect. An important indicator in his eyes is the ranking in the EcoVadis sustainability benchmark.

Matthias Altendorf, CEO Endress+Hauser

Last year, Endress+Hauser again achieved 76 out of 100 points in the audit. This placed the company in the top percentile of the comparison group and earned it platinum status, the highest level of recognition.

The importance the company attaches to the topic of sustainability is also demonstrated by the Endress+Hauser Global Forum, which will be held in Basel from 26 to 28 June 2023. The Group is using its 70th anniversary as an opportunity to discuss the sustainable transformation of the process industry with over 1,000 customers, partners and experts under the headline ‘Insights for sustainable decisions’. Matthias Altendorf: “We are convinced that we are part of the solution and not the problem.”

Endress+Hauser Supports 1.5 Degree Target
Bees on the roof of an Endress+Hauser production building in Reinach, Switzerland, enhance biodiversity

More Information

Please find the current Endress+Hauser Group sustainability report here.

Source

Related Story

Endress+Hauser’s New Customer Experience Centre in Burlington, ON
Endress+Hauser Supports 1.5 Degree Target
The Endress+Hauser customer and training center in Burlington, Ontario, Canada, generates more energy than it consumes

The Customer Experience Centre. Four thousand four hundred square meters of sensationally detailed architecture, designed to ensure a superior customer and employee experience. The CEC showcases Endress+Hauser’s best-in-class instrumentation. It has a full-service calibration laboratory capable of handling the entire spectrum of flow, temperature, pressure, and level instrumentation – unmatched by any in the country.

The crowning jewel is the state-of-the-art Process Training Unit (PTU), which features on-line instrumentation and controls where people can get hands-on experience with operation, diagnostics, and troubleshooting found in real-life process plants. The repair facility, training centre, state-of-the-art offices and recreational space are also impeccable.

Related Articles


Latest Articles

  • Small Town Infrastructure is Being Retrofitted, Federal Funding Helps Drive This Change

    September 9, 2025 By Krystie Johnston Municipalities across Canada are tackling climate change. From big cities to small towns, every action counts. Densely populated metropolitan areas are usually the first places that experience infrastructure upgrades to public buildings and structures because they need to support the increased demands of a growing population. But small towns… Read More…

  • Bossard is Scaling Front Line Flexibility

    September , 2025 Experience Smart Factory Solutions that Adapt to Your Operators’ Needs at FABTECH 2025 By Krystie Johnston Bossard is bringing the future of assembly and inventory management to FABTECH 2025 from September 8 – 11. Visit them at Booth #B13000, at the North Hall in the Automation Pavilion at McCormick Place in Chicago… Read More…


Featured Article

Revolutionizing Material Movement with Autonomous Mobile Robots

Revolutionizing Material Movement with Autonomous Mobile Robots

In today’s fast-paced manufacturing and logistics industries, the need for efficient and flexible material movement solutions has never been greater. Traditional methods like conveyor systems, forklifts, and manual pushcarts have served us well, but they come with limitations.

That’s why Omron is thrilled to announce the launch of their game-changing MD Series of Autonomous Mobile Robots (AMRs). Read more


Products

  • WAGO Expands 750 Series with New Functional Safety I/O Modules

    September 12, 2025 WAGO Expands 750 Series with New Functional Safety I/O Modules WAGO is introducing three functional safety I/O modules to be used with WAGO’s PFC controllers. These new 750 Series modules have four safe inputs along with either two safe outputs at 10 A/24 VDC, or four safe outputs at 2 A/24 VDC… Read More…

  • First Controllers in Trio’s Motion-PLC Range Simplify the Design of Stand-Alone Machines

    September 10, 2025 Trio Motion Technology has launched the first controllers from its new Motion-PLC range, designed to provide advanced motion control performance with the functionality and simplicity of a PLC. The new class of controller combines high-performance motion control over EtherCAT plus logic and I/O expansion, enabling faster, simpler machine development. The first models in… Read More…